Please use this identifier to cite or link to this item:
https://hdl.handle.net/20.500.12411/728
Title: | Resistencia a fractura de coronas elaboradas con disilicato de litio aplicadas en diferentes terminaciones marginales |
Other Titles: | Fracture resistance of crowns prepared with lithium disilicate applied to different marginal terminations |
Authors: | Zúñiga Llerena, Marco Rosero Salas, Fabián Velásquez Ron, Byron |
Keywords: | corona dental materiales dentales fracaso de restauraciones dentales preparación dental disilicato de litio chamfer filo de cuchillo resistencia flexural CAD–CAM diseño asistido por computadora Dental crown dental materials dental restoration failure dental preparation lithium disilicate chamfer knife edge flexural resistance CAD–CAM, computed aided design |
Publisher: | Odontología Vital |
Citation: | Zúñiga Llerena, M., Rosero Salas, F., Velásquez Ron, B. (2020). Resistencia a fractura de coronas elaboradas con disilicato de litio aplicadas en diferentes terminaciones marginales. Odontología Vital (1) 32,45-56. https://revistas.ulatina.ac.cr/index.php/odontologiavital/article/view/379/418 |
Abstract: | Evaluar la influencia del tipo de terminación marginal; filo de cuchillo (F) y chamfer (C) sobre la resistencia flexural de coronas de disilicato de litio CAD/CAM en espesores de 0,8 mm y 0,5 mm. Materiales y métodos: 40 premolares superiores sanos, en 2 grupos de acuerdo con el tipo de terminación G1=F y G2=C; 2 subgrupos referentes al espesor del material Sg1=0,8mm y Sg2 0,5 mm (5 coronas por cada subgrupo), se sometieron a fuerzas de compresión vertical (v) y horizontal (h). Se observó el tipo de fractura más frecuente; cohesivas en porcelana (cp), adhesiva en porcelana (ap), mixta pequeña (mp) y mixta larga (ml). Resultados: en preparaciones a 0,8 mm y 0,5 mm, existió diferencia significativa en relación con la mejor terminación, esta fue el C; sus valores fueron, Sg1 (h=1347,2 N / v=1402,0. F; Sg1 (h=965,6 N/ v= 794,8 N). F a 0,5 mm mostró mejor desempeño ante fuerzas horizontales. C; Sg2 (h=924,8 N /v=813,4 N) y para F; Sg2 (h=1217,0 N /v= 576,0 N). Conclusiones: tipo de fractura más frecuente es cp y ap. Terminación chamfer y filo de cuchillo pueden ser utilizados con seguridad, pues muestran valores aceptables de resistencia flexural, al reducirse el grosor de la restauración en chamfer reduce su resistencia, el filo de cuchillo la aumenta. |
Description: | Abstract: Objective: To evaluate the influence of the type of shoulder margins; Knife edge (F) and Chamfer (C) on the flexural strength of CAD / CAM lithium disilicate crowns in thicknesses of 0.8 mm and 0.5 mm. Materials and Methods: 40 healthy upper premolars, in 2 groups according to the type of termination G1 = F and G2 = C; 2 subgroups referring to the material thickness Sg1 = 0.8mm and Sg2 0.5mm (5 crowns for each subgroup), were subjected to vertical (v) and horizontal (h) compression forces. The most frequent type of fracture was observed; cohesive in porcelain (cp), adhesive in porcelain (ap), mixed small (mp) and mixed long (ml). Results:in preparations with 0.8 mm and 0.5 mm thicknesses, there was a significant difference in relation to the best termination, this was C; their values were Sg1 (h = 1347.2 N / v = 1402.0.F; Sg1 (h = 965.6 N / v = 794.8 N) .F at 0.5 mm showed better performance against horizontal forces C; Sg2 (h = 924.8 N / v = 813.4 N) and for F; Sg2 (h = 1217.0 N / v = 576.0 N) Conclusions: the most frequent type of fracture is cp and ap finishing chamfer and knife edge can be used safely show acceptable values of flexural strength, by reducing the thickness of the chamfer restoration reduces its strength, the knife edge increases it. |
URI: | https://revistas.ulatina.ac.cr/index.php/odontologiavital/article/view/379/418 https://hdl.handle.net/20.500.12411/728 |
Appears in Collections: | Odontología Vital |
Files in This Item:
There are no files associated with this item.
This item is licensed under a Creative Commons License