Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12411/728
Title: Resistencia a fractura de coronas elaboradas con disilicato de litio aplicadas en diferentes terminaciones marginales
Other Titles: Fracture resistance of crowns prepared with lithium disilicate applied to different marginal terminations
Authors: Zúñiga Llerena, Marco
Rosero Salas, Fabián
Velásquez Ron, Byron
Keywords: corona dental
materiales dentales
fracaso de restauraciones dentales
preparación dental
disilicato de litio
chamfer
filo de cuchillo
resistencia flexural
CAD–CAM
diseño asistido por computadora
Dental crown
dental materials
dental restoration failure
dental preparation
lithium disilicate
chamfer
knife edge
flexural resistance
CAD–CAM,
computed aided design
Publisher: Odontología Vital
Citation: Zúñiga Llerena, M., Rosero Salas, F., Velásquez Ron, B. (2020). Resistencia a fractura de coronas elaboradas con disilicato de litio aplicadas en diferentes terminaciones marginales. Odontología Vital (1) 32,45-56. https://revistas.ulatina.ac.cr/index.php/odontologiavital/article/view/379/418
Abstract: Evaluar la influencia del tipo de terminación marginal; filo de cuchillo (F) y chamfer (C) sobre la resistencia flexural de coronas de disilicato de litio CAD/CAM en espesores de 0,8 mm y 0,5 mm. Materiales y métodos: 40 premolares superiores sanos, en 2 grupos de acuerdo con el tipo de terminación G1=F y G2=C; 2 subgrupos referentes al espesor del material Sg1=0,8mm y Sg2 0,5 mm (5 coronas por cada subgrupo), se sometieron a fuerzas de compresión vertical (v) y horizontal (h). Se observó el tipo de fractura más frecuente; cohesivas en porcelana (cp), adhesiva en porcelana (ap), mixta pequeña (mp) y mixta larga (ml). Resultados: en preparaciones a 0,8 mm y 0,5 mm, existió diferencia significativa en relación con la mejor terminación, esta fue el C; sus valores fueron, Sg1 (h=1347,2 N / v=1402,0. F; Sg1 (h=965,6 N/ v= 794,8 N). F a 0,5 mm mostró mejor desempeño ante fuerzas horizontales. C; Sg2 (h=924,8 N /v=813,4 N) y para F; Sg2 (h=1217,0 N /v= 576,0 N). Conclusiones: tipo de fractura más frecuente es cp y ap. Terminación chamfer y filo de cuchillo pueden ser utilizados con seguridad, pues muestran valores aceptables de resistencia flexural, al reducirse el grosor de la restauración en chamfer reduce su resistencia, el filo de cuchillo la aumenta.
Description: Abstract: Objective: To evaluate the influence of the type of shoulder margins; Knife edge (F) and Chamfer (C) on the flexural strength of CAD / CAM lithium disilicate crowns in thicknesses of 0.8 mm and 0.5 mm. Materials and Methods: 40 healthy upper premolars, in 2 groups according to the type of termination G1 = F and G2 = C; 2 subgroups referring to the material thickness Sg1 = 0.8mm and Sg2 0.5mm (5 crowns for each subgroup), were subjected to vertical (v) and horizontal (h) compression forces. The most frequent type of fracture was observed; cohesive in porcelain (cp), adhesive in porcelain (ap), mixed small (mp) and mixed long (ml). Results:in preparations with 0.8 mm and 0.5 mm thicknesses, there was a significant difference in relation to the best termination, this was C; their values were Sg1 (h = 1347.2 N / v = 1402.0.F; Sg1 (h = 965.6 N / v = 794.8 N) .F at 0.5 mm showed better performance against horizontal forces C; Sg2 (h = 924.8 N / v = 813.4 N) and for F; Sg2 (h = 1217.0 N / v = 576.0 N) Conclusions: the most frequent type of fracture is cp and ap finishing chamfer and knife edge can be used safely show acceptable values of flexural strength, by reducing the thickness of the chamfer restoration reduces its strength, the knife edge increases it.
URI: https://revistas.ulatina.ac.cr/index.php/odontologiavital/article/view/379/418
https://hdl.handle.net/20.500.12411/728
Appears in Collections:Odontología Vital

Files in This Item:
There are no files associated with this item.


This item is licensed under a Creative Commons License Creative Commons